Uplift Opportunities Required Data

The main requirements are that there is an IPR curve for either the card you’re trying to analyze, or for the one prior to it ( check the IPR tab for this ) and that the card you are analyzing has a Pump Intake Pressure calculated. ( you also need oil API and water specific gravity in the measurements tab, though that is also a requirement for calculated FBHP ( flowing bottomhole pressure ) on the IPR tab. (edited) 

In order to calculate IPR for Rod Lift, the static bottomhole pressure and bubblepoint pressure needs to be filled in. If calculated flowing bottomhole pressure is used, then you also need the production depth and pump depth ( downhole equipment tab ) as well as the specific gravities ( oil, water ) and the casing pressure.

( All this information will be reported as missing in the XDiag results on the card viewer, another way to tell what needs to be provided )

Config->downhole equipment->perf information-> production interval